Anycubic Wash & Cure 3 Plus

1. Specifications

• Wash Chamber (W×D×H): 260 × 228 × 128 mm

• Washing Basket Volume: 7.6 L (228 × 128 × 260 mm) 

• Curing Chamber (W×D): 220 × 260 mm (42 % larger) 

• Machine Dimensions: 434 × 312 × 267 mm (H × W × D) 

• Weight: 6.5 kg 

• Light Source: 36 W LED @ 405 nm 

• Power Input: 110–240 V AC, 50/60 Hz 

• Noise Level: < 65 dB 

2. Key Features & Benefits

• All‑in‑One Design: Wash and cure in a single compact station—no transfer needed.

• Improved Uniformity: Dual‑layer curing table with 20 % more even UV exposure for consistent results.

• Flexicure Gooseneck Light: Precise spot‑curing for intricate geometries.

• Adjustable Basket Heights: Two positions (150 mm, 250 mm) maximize basket capacity and save IPA when washing fewer parts 

• Low Noise Operation: Sealed design and optimized software keep sound under 65 dB.

3. In the Box

• Wash & Cure 3 Plus unit

• Cleaning bucket & PP basket

• Hex key set & rack bar

• Flexicure gooseneck curing light

• Curing table (dual‑layer)

• Power adapter & cables

• Instruction manual

4. Usage & Maintenance

1. Setup: Place station on flat surface; pour IPA into wash bucket.

2. Washing: Hang build platform or baskets at desired height; run wash cycle.

3. Curing: Transfer parts to curing table; close cover and start cure cycle.

4. Cleaning: Wipe chambers with isopropyl alcohol; dry thoroughly.

5. Tips: Replace IPA when discolored; keep LED lenses clean for best performance.

5. Shipping & Warranty

• Fast Shipping in Egypt via PrintFy3D local logistics

• 1‑Year Manufacturer Warranty covering defects in materials and workmanship